| | | | |
| Utilities |
Software |
Industrial and Engineering Software |
 |
Several handy features are included in this module. Volume Fraction Converter: Converts between fiber volume and weight fractions.
Filament Winding Calculator: Calculates the layer and lay-up thickness for a filament wound lay-up.
... more |
| Laminated Plate |
Software |
Industrial and Engineering Software |
|
Once you have defined the plate length and width, three different options are available. Plate bending allows calculation of moments and deflections for simply supported uniform or concentrated loaded plates.The stability option calculates the minimum... more |
| Laminate |
Software |
Industrial and Engineering Software |
|
This module is packed with features. A library of composite and metallic lamina properties can be used or input your own. A lay-up of any combination of laminae, at any angle can be created. Global laminate material properties are easily calculated and... more |
| Micromechanics |
Software |
Industrial and Engineering Software |
|
The micromechanics module allows you to select from a library of 3D fiber and matrix properties or input your own. Once the fiber and matrix properties are selected, lamina mechanical properties, physical properties and strengths can be calculated on... more |
| Micromechanics |
Software |
Industrial and Engineering Software |
|
The micromechanics module allows you to select from a library of 3D fiber and matrix properties or input your own. Once the fiber and matrix properties are selected, lamina mechanical properties, physical properties and strengths can be calculated on... more |
| Towpregs |
Composite Parts |
Polymer and Plastic Composites |
|
YLA offers a full line of towpreg and slit tape material options for filament winding, braiding and fiber placement fabrication techniques. The company provides cyanate ester, epoxy and bismaleimide products impregnated on individual fiber tows and yarns... more |
| Industrial Dampers |
Airflow Equipment |
Service & Maintenance |
|
Engineered for
Air performance control ,Power savings ,System isolation/shutdown ,High temp/dust-laden, conditions ,Air dilution systems ,Low leakage applications ,Engineering Design
Rbrobinson?s staff of mechanical engineers uses... more |
| Air Foil |
Fan & Blower |
Service & Maintenance |
|
Robinson heavy-duty airfoil fans: Designed, engineered and tested for airstreams requiring high efficiency and quiet operation.
Induced Draft and Forced Draft Service Heat Recovery, Incineration,Air Pollution ,Waste-to-Energy,Boiler Operations... more |
| Solid Laminates |
Composite Parts |
Polymer and Plastic Composites |
 |
Carbon Fibre
High strength/low weight, often used in motor racing and aerospace applications.
Phenolic/Epoxy Glass
Used for aircraft galley, interior refurbishment and tooling structures.... more |
| Cellite Decorative Panels |
Composite Parts |
Polymer and Plastic Composites |
|
Cellite Decorlam
Cellite aluminium or fibre sandwich panels with a melamine finish bonded to one or both faces. With aluminium skins, Cellite Decorlam meets the requirements of BS 6853:1999.
Cellite Decorlam
Similar to the above construction... more |
| Continuous filament mats |
Manufacturing Tools |
Manufacturing and Process Equipment |
|
These are felts of continuous filaments distributed in uniform layers as they leave the bushing and held together by a binder. The type and content of the binder depend on the application. These mats are particularly well suited to molding between matched... more |
| Roving |
Manufacturing Tools |
Manufacturing and Process Equipment |
|
Roving is produced either directly from the bushing by drawing a large number of filaments (direct roving), or by assembling several strands in parallel, with no twisting (assembled roving). Roving, consisting of filaments from mostly 10 to 24 microns... more |
| Ceramic Forming Molding Compounds |
Material Analyzer |
Polymer and Plastic Composites |
|
Starfire?s Silicon Carbide (SiC) Ceramic Forming Molding compounds produce high quality, near-net shape SiC components at low firing temperatures with minimal machining. The parts remain hard and strong at high temperatures and are highly resistant to... more |
| Carbon Fibre Tubes |
Fiber Sheet |
Polymer and Plastic Composites |
|
Processes
There are a variety of manufacturing processes applicable to the production of composite tubes. The choice of process is influenced by the properties required, quantity, costs, etc.
Pre-Preg Rolling
Layers of material are rolled around a... more |
| Plastic Composites/Cable Protection Systems |
Plastics are Polymers |
Polymer and Plastic Composites |
 |
Quadrant Plastic Composites manufactures thermoplastic composites consisting of thermoplastics (mainly polypropylene) in combination with reinforcement in the form of glass mats, glass fibre and polyester fabrics, or natural fibres such as kenaf, sisal... more |
| OLHI door hinges |
Door Hinges |
|
|
ALM supplies a wide range of door hinges to suit all your cubicle requirements ranging from butt hinges through to wrap around hinges. Most hinges incorporate easily adjustable cams, allowing the door to fall open/closed and offer a choice of through... more |
| MBE Components E-Beam Evaporators |
Evaporator |
|
 |
The electron beam evaporator (capacity up to 100ccm) is an evaporation source to achieve high growth rates for low vapor pressure materials. It is used especially if ultra high purity evaporants are required.... more |
| E-Beam Evaporators Triple EFM |
Evaporator |
|
|
3-cell UHV evaporator with totally independent cells, filaments and integral flux monitors for stoichiometric growth of compounds using simultaneous or consecutive evaporation.... more |
| E-Beam Evaporators EFM 6 |
Evaporator |
|
|
The EFM 6 evaporator extends the EFM product range onto a larger scale. With a NW 63 CF (4,5" OD) base flange and a crucible capacity of up to 10 cm3, the EFM 6 holds about ten times as much material as the EFM 3. Already at a short working distance the... more |
| E-Beam Evaporators EFM 3i |
Evaporator |
|
|
Specifically designed for a smooth layer growth, the EFM 3i allows the controlled evaporation of the target material, and the generation of an ions for Ion Beam Assisted Deposition (IBAD). The EFM 3i is based on the well known EFM 3 evaporator, with the... more |
